The system is reporting Collimator Collision Reverse Motion to continue on the DL Monitor.:Advantx E generator Systems:5…
The system is reporting Collimator Collision Reverse Motion to continue on the DL Monitor.:Advantx E generator Systems:50015 POS
Symptom
The system is reporting Collimator Collision Reverse Motion to continue on the DL Monitor. The system is reporting Collimator Collision Reverse Motion to continue on the image Monitor. For Advantx related systems the Advantx console displays: "Collimator Collision" The system is reporting Collimator Collision Reverse Motion to continue on the DL image Monitor. For Advantx related systems Tthe Advantx console displays: "Collimator Collision"
Error message
error Code = 50015, error Text = POS : COLLIMATOR COLLISION, debug Text /= pos-error=4A13, hw-status=0010, usr-status=0000, recovery Class /= WR, major Function /= VAS / POS System impact: Half speed until system level1 collision is cleared. Error message cleared following 2 seconds. Displayed message : "Collimator collision: reverse motion to continue".
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Software
- All AdvantxE Software releases All AdvantxE Software releases All Advantx E Software releases
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.