GE Healthcare · X-ray VascularInnova280000950000472800060280005928000612800006
150593 INX100, Monitor displays message "Fatal Error"
Symptom
INX100, Monitor displays message "Fatal Error" Monitor displays message "Fatal Error". Powered off and on a couple of time with same message.
Error message
System Boot Failed: Boot Timed out: Innova Power up issue. With a lot of errors for communication System Boot Failed: Boot Timed out: 2800009 XRSubSysMgrDL, Due to a possible hardware error detected with SIB, reset is not available SYSTEM ERROR: NOT COMMUNICATING WITH NODE, Debug: fct-status=60 hw-status=0 pos-error=4020 usr-status=0 HWStatus=0000 User=0061 0000 4020 5000047 System Boot Failed: Boot Timed out Feedback; One scenario included:2800060 IH XRSubSysMgrDL Failure of XRDataMgr during boot of the application 2800059 IH XRSubSysMgrDL Failure of XRImProc during boot of the application 2800061 IH XRSubSysMgrDL Failure of XRUserIfDL during boot of the application scattterd amoungst multiple: 2800006 AR XRSubSysMgrDL System comms error detected by subsysmgr 5000020 DO SubSysMgr Error in Communication Infrastructure Debug: XRUserIfDL::COMM_ERROR_7 :: ERROR: Publishing Event on Local Actor 212009270 02/14/2011 19:44 GMT
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.