GE Healthcare · X-ray VascularAdvantxInnova
LCV+ positioner sometimes loses power during operation, try to reboot positioner for several times, but always failed.
Symptom
LCV+ positioner sometimes loses power during operation, try to reboot positioner for several times, but always failed. Warm-start cannot be realized.
Error message
4AE1 Gantry problem ,try again or call service Check the SYSMAINT.LOG, and find out the flowing errors: 4AE1 00 0B 0000 0000 ap 00001DD5 0003 0001 00C1 0790:01AF 4AE1 00 0B 0000 0000 ap 00001DD5 0000 0001 00C1 0790:01AF 4AE1 00 0B 0000 0000 ap 00001DD5 0001 0001 00C1 0790:01AF POS: GANTRY INIT FAULT.CALL SERVICE.
Applies to
- Models
- Advantx, Innova
- Product
- Advantx, LFX Advantx product line LFX Advantx product line
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.