GE Healthcare · MRSignaHiSpeedExcite226123022543422249129224860222626062254352
PDU in Stop Mode and TPS Download failure
PDU was in stop mode.
Symptom
PDU in Stop Mode and TPS Download failure
Error message
2261230 The SCP received an unknown frequency identifier from the RF cabinet. Please perform a TPS Reset. Frequency = 0xFF-> 2261230 PAC3T NSP SCP:RfNbCanHWO 1737 The SCP received an unknown frequency identifier from the RF cabinet. Please perform a TPS Reset. Frequency = 0xFF-> 2254342 RF Amplifier Interface RF Amp serial link failure. RF AIF failed to receive a packet transmission echo. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 5040 Expired time: 40 Tx byte: M 2254342 PAC3T NSP SCP:../rf_nb_serial 1795 RF Amplifier Interface <-> RF Amp serial link failure. RF AIF failed to receive a packet transmission echo. If the link is broken, a separate error message will be logged. If not, a spurious error occurred. Timer: 5040 Expired time: 40 Tx byte: M 2249129 SRI Communication Error. A reset was not detected when requested to the SRI. 2248602 PDU in Stop Mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed. 2248602 PDU is in Stop mode. Emergency Stop button was pressed or PDU 24 Volt supply has failed. 2262606 The PHPS was not detected on the system CAN bus 2262606 The PHPS was not detected on the sy
Applies to
- Models
- Signa, HiSpeed, Excite
- Product
- Signa HDxT This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software. This product is for 1.5T Signa HDxT systems with 15.0 software and HDi systems with 15.0 software.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.