Innova System boot failure Any defect that prevents from getting the first acquisition after the system reset.

Symptom

Error message

1200102 handleConditionerStatus] Alarms are raised : (Float Switch : OK) (High Alarm : BAD) (Low Alarm : OK) (Sensor Alarm : OK) (Dryer Alarm : OK) (Watchdog Alarm : OK) 1200102 handleConditionerStatus] Alarms are raised : (Float Switch : OK) (High Alarm : BAD) (Low Alarm : OK) (Sensor Alarm : OK) (Dryer Alarm : OK) (Watchdog Alarm : OK

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova 2000 Innova 2000 systems Innova 2000 systems Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Detector conditioner 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172 5131740 SMC detector conditioner Detector conditioner Current rev is -15 but a -7 through -15 is acceptable. Detector Conditioner, connecter kit 2379172

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.