Elegance, Table Operation Degraded; Call service is displayed on the monitor.

Symptom

Error message

INX100: 1070419 No activation of negative limit switch on longi axis, Followed by 1070384, 1070383, and 1070245 TSG0076-SN limit switch cable troubleshooting ELEGANCE ERROR FOUND : Error Code 0x152b Z:/heroic/11bit can.c 2179 Further informations in long description. 1070419 No activation of negative limit switch on longi axis DO Table axis Longi motion TSG0076-SN limit switch cable troubleshooting - ELEGANCE ERROR FOUND : Error Code 0x152b Z:/heroic/11bit can.c 2179 Followed by 1070384 Table operation degraded following table failure WR Table control Software Problem 0 0 - ELEGANCE ERROR FOUND : Error Code 0x1508 Z:/heroic/11bit can.c 2179 1070383 "Bolus function is not available, due to table degraded mode" DO Table axis Longi motion Software Problem 0 0 - ELEGANCE ERROR FOUND : Error Code 0x1507 1070245 Position/speed feedback lost from longi SN DO Table (null) None 0 0 - ELEGANCE ERROR FOUND : Error Code 0x147d Z:/heroic/11bit can.c 2179

Applies to

Models

Innova

Product

Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Software

$ IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1 IQ+ or PRO table, ELEGANCE_IS2, DL_ELEGANCE_3.2.1

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.