What are the Expected Z2 Shim Circuit Resistance Readings Looking Toward the Magnet.
Symptom
What are the Expected Z2 Shim Circuit Resistance Readings Looking Toward the Magnet See Long Description The FE is troubleshooting a Z2 shim problem. He's already replaced the Z2 Shim Supply but the symptoms are unchanged. He suspects a problem, such as an open or short circuit, in the Z2 shim wiring looking toward the magnet from the output of the Z2 shim supply, but nothing is documented as to how to proceed, i.e. what pins, wires to measure and where, and what resistance's should be seen in a normally functioning system, so he has nothing to refer to.
Applies to
- Models
- Excite
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.