MDS Link Failure on First Bootup of the Day due to CPD Module.
Symptom
MDS Link Failure on First Bootup of the Day See Long Description MDS link failures on 1st boot up of the day, every day. Power is shut off at A1 box every night. Customer simply reboots to recover. The problem only happens when system sits overnight with no power. The InHouse II engineer can't duplicate the problem during the day, even with A1 power off. The system also logs PAC and SRI not responding errors, which implies no power to them from the SSM. Unknown if power is being applied to them or not. Error codes logged are 2225691, 2225697, 2225334, 2225337, 2225704, 2225935 , with " MDS Link is broke between the RF and Syscab ". (see Error concepts for specifics on these errors). In the MDS link failure errors, this code is always seen, which decodes as the RF cabinet, on this system that would be the CPD Module in the SSM: Transmitted byte: 0x11 Author Pual Lyman SME Scott Allsop October 12, 2009
Error message
2225704 MDS link failure. The MDS fiber optic link appears to be broken between the RF and System cabinets. Error: 2225704 Host: lx-mr Process: NSP File: HPC_PORT_ID:spi_mds Line: 300 MDS link failure. The MDS fiber optic link appears to be broken between the RF and System cabinets. Check RF cabinet power, fiber optic connections and signal level of the fiber optic link between the cabinets. Run MDS fiber optic link diagnostics. 2225935 The PAC does not respond. Check PAC power and fiberoptic connections, run PAC diags. 2225935 The PAC does not respond. Check PAC power and fiber optic connections, run PAC diags. This error condition adversely affects gated scans only. 2225935 The PAC does not respond. Check PAC power and fiberoptic connections, run PAC diags. This error condition adversely affects gated scans only. 2225334 SPI-SRI Communication Error. SRI failed to respond to a data packet from SPI. Error: 2225334 Host: MRS2 OC0 Process: NSP File: HPC PORT ID:spi sri resp timeout Line: 12 SPI-SRI Communication Error. SRI failed to respond to a data packet from SPI. Data packets waiting for a response: 0x4000 2225691 MDS link failure. The IPG failed to receive an MDS transmission
Applies to
- Models
- Signa, Excite
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- SecondOpinion CPD Module 2160200-5 This part requires second opinion approval before ordering. See comments in resolution concept for second opinion requirements before ordering this part.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.