GE Healthcare · X-ray VascularInnova1050011
Gantry C-arc motion is jerky and it is making strange noises
Symptom
Gantry C-arc motion is jerky and it is making strange noises
Error message
INX100: 1050011 Carc AXIS MCB INTERNAL DO GantryAxis Speed Degraded Carc_AXIS_MCB_INTERNAL 1 0 - H Bridge problem (prd: C4) 1050011 Carc AXIS MCB INTERNAL DO GantryAxis Speed Degraded Carc_AXIS_MCB_INTERNAL 1 0 - H Bridge problem (prd: C4). On Enable + command motion on C-arc axis. In addition, PRD code 44 is displayed on both L-arm & Pivot MCB's and PRD code AD is displayed on the detector lift MCB.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.