GE Healthcare · MR21433982143399
What is the Correct Part Number for the RF Amp on Profile 1 through 3B?
Symptom
What is the Correct Part Number for the RF Amp on Profile 1 through 3B? The RF Amps used on Profile 1-3b are end-of-life and no longer repaired. The expired part numbers are 2143398 and 2143399. Profile/Contour 3C's and up amp is OK.
Applies to
- Product
- Profile 3 Ultrasparc CPU with AN8290Y gradients
- Component
- 2331243 Hardware Kit Hardware kit needed if replacing the Teli amp for the first time. 2230888-2 Teli RF Amp
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.