GE Healthcare · X-ray VascularInnova1050274
When Driving the Pivot Axis LAO/RAO the motion is Jerky.
Symptom
When Driving the Pivot Axis LAO/RAO the motion is Jerky. The Pivot will stop and have to be enabled again for motion to continue. When Driving the Pivot Axis LAO/RAO the motion is Jerky. The Pivot will stop and have to be enabled again for motion to continue.
Error message
INX100 error 1050274 PIB 180V OVERTEMP: Component(s)_Positioner_Martek; - Martek: 180V module overtemperature
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.