Protocol or Acquisition mode selection failed is displayed on the Innova Monitor.
Symptom
INx100: Protocol or Acquisition mode selection failed is displayed on the Innova Monitor. When trying to select another protocol or select another acquisition mode in a selected protocol, the message “Selection failed, Retry protocol selection” is displayed on live monitor. Then, X-rays are not available. Protocol or Acquisition mode selection failed is displayed on the Innova Monitor. When trying to select another protocol or select another acquisition mode in a selected protocol, the message “Selection failed, Retry protocol selection” is displayed on live monitor. X-rays are not available.
Error message
INx100: 4200067 IH XRUserIf User request failed Debug: [XRUserIf::setActiveOpModesDone] setActive opmode received with bad status.
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $ Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9 FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 healthpage tag for this software is UNITY_M4_FMI_4.21 212009270 03/26/2010 13:31 GMT
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.