INX1X1, Innova Biplane Boot Failure, Simpte Pattern is displayed.

Symptom

Error message

1400300 Frontal: DIPB power up tests failure, followed by 1400001, 1400002, 1400019, 1800019 1400300 Frontal: DIPB power up tests failure; IH, [FPGA_Driver::DIPB_init] failed to initialize DIPB 1400001 Front: Software error IH; [SystemInterfaceBoardDriver::readHwConfigParameters] BOARD_TYPE (NONE) unknown 1400002 Front: Operationg system error IH; [ImageAcquisitionMonitoring::ImageAcquisitionMonitoring] Unable to get instance of Gitane Driver 1400019 Front: Software error DO; [Preprocessi 1400300 Frontal: DIPB power up tests failure, followed by 1400001, 1400002, 1400019, 1800019 1400300 Frontal: DIPB power up tests failure; IH, [FPGA_Driver::DIPB_init] failed to initialize DIPB 1400001 Front: Software error IH; [SystemInterfaceBoardDriver::readHwConfigParameters] BOARD_TYPE (NONE) unknown 1400002 Front: Operationg system error IH; [ImageAcquisitionMonitoring::ImageAcquisitionMonitoring] Unable to get instance of Gitane Driver 1400019 Front: Software error DO; [PreprocessingDriver::getInstance] IP_BOARD_TYPE(NONE) is not recognized 1800019 Front: Software error DO; [DigAbdDriver::getInstance] IP_BOARD_TYPE(NONE) is not recognized; assuming DIPB by default

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System

Software

$ M4 SPAD BIP_4.18.5, DL_SPAD_4.15.1 FMI 12108 $New, M4 SPAD BIP_4.18.5, DL_SPAD_4.15.1 FMI 12108 or $ new, Innova Biplane M4 BIP_4.18.5, DL_4.15.1 FMI 12108 $New, M4 SPAD BIP_4.18.5, DL_SPAD_4.15.1 FMI 12108 or $ new, Innova Biplane M4 BIP_4.18.5, DL_4.15.1 FMI 12108

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.