GE Healthcare · X-ray Vascular
DLX3 will not boot, boot flow procedure chart TSG when DLX locked, gemnet unavailable and Exabyte errors
Symptom
DLX3 will not boot, boot flow procedure chart TSG when DLX locked, gemnet unavailable and Exabyte errors
Error message
"Check DLX Cabinet Power" error message displayed on Flat screen "Check DLX Cabinet Power" error message displayed on Flat screen. Communication problem between SUN and VDP at DLX application start up (i.e after typing DLX at DLX login prompt).
Applies to
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Component
- DLX image system DLX DLX image system
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.