GE Healthcare · MRExciteSigna
Main Disconnect Panel does not turn on.
Symptom
Main Disconnect Panel does not turn on. Cannot power on PDU or Cold Head (if cold head compressor power is supplied through Main Disconnect Panel (MDP).
Applies to
- Models
- Excite, Signa
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 14.0 For Hino Excite HDe 14.0 systems only.
- Component
- 2276547-14 Battery 7.5 Amp Hour for Main Disconnect Auto Restart Circuit 2276547-14 Battery 7.5 Amp Hour for Main Disconnect Auto Restart Circuit. 2276547-16 750mW Battery Charger for 7.5 Amp Hour Battery on Main Disconnect Auto Restart Circuit. 2276547-16 750mW Battery Charger for 7.5 Amp Hour Battery on Main Disconnect Auto Restart Circuit.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.