GE Healthcare · X-ray R&FDiscoveryOptima340000510902011090192340001710902531090252
New Install. CAN Bus communication to the table cannot be established.
Symptom
New Install. CAN Bus communication to the table cannot be established. See Long Description The ALB Board in the table was replaced with no change in the symptoms. At boot, the error codes listed under the Error(s) Section may be present.
Error message
3400005, 1090201, 1090192, 3400017, 1090253, 1090252, 1090201 errors See Long Description 356,2009-07-07,14:26:00:438,"XRS",3400005, The system is booting.,2222,DO,DEFAULT, SysCntrl, Control, computer,1,1,1,(null),XRSysMgr.cpp,179 357,2009-07-07,14:26:09:091,"VEN",1090201, Table IO CANopen Communication Failed,2222,WR,DEFAULT, Pos, DeviceGroup, 1. Check CAN cable connections and terminations.2. Check table power supply connections and fuses.3. Check connections between table I/O board.,1,1,1,(null),../DeviceGroup/RadTableDevice/RadTableDevice.cpp,752 358,2009-07-07,14:26:09:145,"VEN",1090192, Table Detector Position Encoder Error,2222,WR,DEFAULT, Pos, DeviceGroup, 1. Check the table detector position encoder and connections.2. Check table CAN communication.,1,1,1,(null),../DeviceGroup/RadTableDevice/RadTableDevice.cpp,1654 359,2009-07-07,14:26:11:824,"XRS",3400017, System boot successful,2222,DO,DEFAULT, SysCntrl, Control, computer,1,1,1,(null),XRSysMgr.cpp,1236 360,2009-07-07,14:26:11:826,"VEN",1090253, Table Height encoder CANopen communication Failed,2222,WR,DEFAULT, Pos, DeviceGroup, 1. Check CAN cable connections and terminations.2. Check table power supply connections and fus
Applies to
- Models
- Discovery, Optima
- Product
- Discovery XR650 Optima XR640
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- Definium 8000 Wallstand or Table Only Configurations running VolumeRAD M3 Software.
- Collimator light does not work from the RCIM2 even though the button is present
- Unit not powering up correctly getting Jedi can bus errors
- Definium 8000 Thunder
- Discovery XR650 or Optima XR640
- No procedure to copy IP looks from a Definium 8000 system to a Discovery XR650 or Optima 640 system