SN 4873, INX100 Bolus, Incorrect suif screen for x-ray tube calibration on innova bolus systems
Symptom
Used, SN 4873, INX100 Bolus, Incorrect suif screen for x-ray tube calibration on innova bolus systems rev. 1 5339403-8en PURPOSE/SYMPTOM Purpose of this service note is to inform about correct procedure to be used in the SUIF for Tube calibration on Innova Bolus systems. PROBLEM SUIF tube calibration procedure might have swapped and unreadable screenshots causing incorrect exposure parameters to be entered. SOLUTION Make sure that correct parameters are used during Tube calibration as per CAL0072 from SM or ASM as per procedure below
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- $ Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9 FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 healthpage tag for this software is UNITY_M4_FMI_4.21 212009270 03/26/2010 13:31 GMT
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.