ID:139040 3D Calibration out of Date: 3D calibration is due in the next 15 days:Innova 4100:810028 System is not calibra…
ID:139040 3D Calibration out of Date: 3D calibration is due in the next 15 days:Innova 4100:810028 System is not calibrated for 3D
Symptom
3D Calibration out of Date: 3D calibration is due in the next 15 days The 3D calibration procedure needs to be performed. At Unity Level it takes around an hour, with Innova CT it can take up to 2 hours. Make sure the sytsem has been on long enough to be stable. If the cal goes past due, it will not inhibit the customer from doing a 3D, however that is not recommended. The 3D calibration procedure needs to be performed. At Unity Level it takes around an hour, with Innova CT it can take up to 2 hours. Make sure the system has been on long enough to be stable. If the cal goes past due, it will not inhibit the customer from doing a 3D, however that is not recommended.
Error message
error Code = 810028, error Text = System is not calibrated for 3D : never calibrated or corrupted calibration files., debug Text += ERROR: the 3D calibration file is not valid, recovery Class = IH, major Function /=XRDataMgr System impact: Exam failure. Displayed message : "System is not calibrated for 3D. Perform 3D calibration or Call Service.".
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $ Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9 FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 healthpage tag for this software is UNITY_M4_FMI_4.21 212009270 03/26/2010 13:31 GMT
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.