GE Healthcare · X-ray VascularInnova50210
138933 The system will not complete a bolus chase.
Symptom
The system will not complete a bolus chase. Tube collision sensor error is displayed on the the monitor.
Error message
error Code = 50210, error Text = COLLISION DETECTION PROBLEM: Dynamic Procedure is aborted, debug Text += pos-error=4AB5, hw-status=0004, recovery Class = WR, major Function /= VAS / POS System impact: Bolus X-ray unavailable. Displayed message : "Collision detection failure, continue with care; Otherwise call Service"
Applies to
- Models
- Innova
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $Bolus M4++ Bolus_M4_1.25.FMI 12089 DL release : DL_LBYBOLUSM4_11.1.060210 Ghost DL-2 : NA Ghost DL-3 : 18.8 Ghost DL-5 : 20.6 DL : DL_LBYBOLUSM4_11.1.060210 DL Atlas Core : 3.1.R RTAC Atlas Core : 3.1.R IDC : 4.5.6 Calypso : 2.22 Calypso Uptime : BOLUS1.25 Positioner : 1.2.24B_IS6.6 Jedi : B6.30BFD
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.