Operator Manual 2422148, Rev 2 (07/08) for USAI 1.5T and 3.0T Shoulder Array States to Use Coil SNR Test but Coil is Not…

Operator Manual 2422148, Rev 2 (07/08) for USAI 1.5T and 3.0T Shoulder Array States to Use Coil SNR Test but Coil is Not in the Tool See Long Description Operator Manual 2422148, Rev 2 (07/08) for USAI 1.5T and 3.0T Shoulder Array states to use the Coil SNR Test to evaluate the coil's SNR but this coil is not listed and not selectable in the tool. An In house Engineer (a customer) had just obtained a copy of the operator manual (part number 2422148, rev. Rev 2 (07/08)) for the 1.5T and 3.0T Shoulder Array, and on page 4-7 of the manual, under the heading "12.x and 11.x Coil Quality Assurance Check", the manual states to run the Coil SNR Test for this coil. But he could find no selection in the Coil Name pull down for this coil in the Multi coil SNR Tool Control window. He then contacted a GE Field Service Engineer, to ask him to repair the system such that a selection would appear in the Coil SNR test program, also known as the Multi coil SNR Tool, for the (USAI) 1.5T Shoulder Array. iTrak # 13279988.