How to measure Actual KVP feedback in Jedi Generator.

Jedi. How to measure Actual KVP feedback in Jedi Generator. Using a Scope one can measure the actual KVP feedback in a Jedi Generator using selected pins on the J5 TEST jack on the PPC KVP Controller Board. The place to measure the complete KVP level is on a Plug on the KVP controller board. J5 pins : Pin 26 Full KVP 1VDC = 20 KVP Pin 27 Anode KVP 1VDC = 10KVP Pin 30 CAthode KVP 1VDC = 10KVP Reference the Jedi Chassis or Pin 34 on the J5 Test Jack Did you know there is a way to look at actual KVP feedback in the Jedi Generator. Like we did in the MPPU ?? It can also be split to Anode KVP and Cathode KVP as well as a total of both. The place to measure the complete KVP level is on a Plug on the KVP controller board. J5 pins : Pin 26 Full KVP 1VDC = 20 KVP Pin 27 Anode KVP 1VDC = 10KVP Pin 30 CAthode KVP 1VDC = 10KVP Reference your scope on the silver JEDI case. Look at the pictures below for reference. From engineering Clemot June 2009