The helium level is dropping greater than 5% over a 30 day period due to a possible helium leak.MAC00005 Proactive Magne…
The helium level is dropping greater than 5% over a 30 day period due to a possible helium leak.MAC00005 Proactive Magnet Performance Issue.
Symptom
MAC00005 Proactive Magnet Performance Issue. Low level Helium Loss > 5% in 30 days. The OnWatch engine has determined that the helium level has experienced a low level helium loss greater than 5% in the past 30 days. NOTE: The Digital Services (DS) Rules Engine detected this problem. This issue is only applicable when detected in this way, and should not be reused in Knowledge objects for normal reactive service.
Error message
MAC00005 Proactive Magnet Performance Issue. Low level Helium Loss > 5% in 30 days. The OnWatch engine has determined that the helium level has experienced a low level helium loss greater than 5% in the past 30 days. NOTE: The Digital Services (DS) Rules Engine detected this problem. This issue is only applicable when detected in this way, and should not be reused in Knowledge objects for normal reactive service.
Applies to
- Product
- Magnet LCC 300. Software Version Concept should NOT be selected for Magnet Products Low Cryogen Consumption Serial number:Wxxx Field strength: 3.0 T He Vessel Pressure:>3 psig but <5 psig Shield Temp:< 55 Kelvin Coldhead Temp:> 3.8K but < 4.5K Recondenser Temp:> 4.2K but < 4.55K Delta Temp (Coldhead - Recondensor):> 0 but < 0.3K Min. LHe Fill Level: 60% Min. LHe Ramp Level: 100% Min. LHe Shim Level: 80% Helium Volume:1735 Liters Burst Disk:2349529 Burst Disk O-ring:46-281101P1 Baffle Assy: 2180818 Shim Lead Large 5/8:2173354
- Component
- 2237498 RELIEF VALVE - 1/2 NPT X 5 PSIG. 2237498 RELIEF VALVE - 1/2 NPT X 5 PSIG.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.