GE Healthcare · MRExcite2248650
Patient comfort sensor trip Due to Gradient Cooling Problem
Symptom
Intermittent Warnings of high Patient Comfort Temperature Readings Intermittent Warnings of high Patient Comfort Temperature Readings.
Error message
2248650 The patient comfort level is warmer than normal. The patient may be uncomfortable. Further increases in the temperature will inhibit scanning. 2248650 b4a NSP SCP:BoreTempSriHWO 987 The patient comfort level is warmer than normal. The patient may be uncomfortable. Further increases in the temperature will inhibit scanning. Verify: 1. Patient fan is ON. 2. Room temperature is normal. 3. Air flow through the bore is unobstructed.
Applies to
- Models
- Excite
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 14.0 For Hino Excite HDe 14.0 systems only.
- Component
- 2222564-30 50 and 60 HZ chiller by Lytron. See Long Description 2222564-30 50 and 60 HZ chiller by Lytron Model Number RC045J03BG0C011 Specified by 2222564PSP. Lower level FRU's should be utilized before attempting to replace the entire chiller. Gradient Chiller Motor - 2222564-25 Pump Assembly for Lytron Chiller - 2222564-29
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.