the whole image is very dark than normal and there is artiface in the top part of the image during Vascular acquisitions…
the whole image is very dark than normal and there is artiface in the top part of the image during Vascular acquisitions @ FPS<6.3, but the images for vuascular FPS 6.3, Cardiac and fluoro is normal.
Symptom
DLX, The whole image is very dark, and there is artifact in the top part of the image during Vascular acquisitions @ FPS DLX, The whole image is very dark, and there is artifact in the top part of the image during Vascular acquisitions @ FPS<6.3, but the images for vascular FPS 6.3, Cardiac and fluoro is normal..
Applies to
- Models
- Innova
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Software
- DLX C22.09 DGW Sw. Jumpstart Software JumpStart Apps Apps Version Rev Kit Floppy CD Solaris Floppies ----------- ----------- ---------- ---------- --------- --------- --------- 5.02 4.0 2276196 2281552 2276194 2211863 N/A
- Component
- GEIM board problem, replace the GEIM GEIM board problem, replace the GEIM GEIM board problem, replace the GEIM
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.