GE Healthcare · MRExciteSigna
Coil ID LEDs in EXCITE HD 8 channel 'A' and 'B' connectors sometimes don't work.
Symptom
Coil ID LEDs in EXCITE HD 8 Channel 'A' and 'B' Connectors Sometimes Don't Work. Effectivity: All Signa MR EXCITE HD systems. Problem Description: After installing the new EXCITE HD LPCA some FEs have reported that the Coil ID LEDs inside the new 'A' and 'B' 8 channel coil connectors never light. One or more of the LEDs always stay dark. The redundant 'A', 'B', and legacy Coil ID LEDs visible from the front of the 16 Channel Switch, however, correctly change state when coils are connected and removed. SMILe 2/15/05
Applies to
- Models
- Excite, Signa
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.