GE Healthcare · X-ray VascularInnova380033136020193602087
134968 Image Quality Degraded; Tube inspection requested displayed during flouro or Record, may hear Loud popping noise…
134968 Image Quality Degraded; Tube inspection requested displayed during flouro or Record, may hear Loud popping noise coming from tube
Symptom
Image Quality Degraded; Tube inspection requested displayed during fluoro or Record, may hear loud popping noise coming from tube Image Quality Degraded; Tube inspection Requested displayed during fluoro or Record, may hear loud popping noise coming from tube Image Quality Degraded. Tube inspection Requested displayed during fluoro or Record , may hear loud popping noise coming from tube.
Error message
Error 3800331 followed by 3602019 followed by 3602087 Error 3800331 Bad actual techniques received in acquisition, followed by 3602019 Bad kV Detected, followed by 3602087 Jedi: Tube spits error details with debug: Anode: 0 Cathode: 0 Anode+Cathode: 0 kV reg on steady state: 2 kV reg on kV rise: 0
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- $ Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9 FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 healthpage tag for this software is UNITY_M4_FMI_4.21 212009270 03/26/2010 13:31 GMT
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.