GE Healthcare · MR
Cannot Establish Landmark Due to System Needs Longitudinal Drive Calibration.
Symptom
Cannot establish Landmark. The landmark could not be established after a power outage. The cradle was driven to the home position but there were no lights on the enclosure and the table position did not increment when driven into the bore. The position alignment lights work but nothing happens when the landmark button is pushed.
Applies to
- Product
- HF OpenSpeed HFO1 HFO2 and HFO3 Only.
- Software
- HFO3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.