GE Healthcare · MRExciteSigna
Twin speed Main Disconnect Panel does not turn on due to lack of 12 DC from Charging Circuit.
Symptom
Twin speed Main Disconnect Panel does not turn on
Applies to
- Models
- Excite, Signa
- Product
- 3T Excite HDx 14.0 Software. The software that this solution is tied to is indicated by the Software concept below.
- Software
- 14.0 M5 Excite HDx HDi Platforms only.
- Component
- 2276547-16 750mW Battery Charger for 7.5 Amp Hour Battery on Main Disconnect Auto Restart Circuit. 2276547-16 750mW Battery Charger for 7.5 Amp Hour Battery on Main Disconnect Auto Restart Circuit. 2276547-14 Battery 7.5 Amp Hour for Main Disconnect Auto Restart Circuit 2276547-14 Battery 7.5 Amp Hour for Main Disconnect Auto Restart Circuit.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.