GE Healthcare · X-ray VascularInnovaAdvantx60046
No gantry motion is reported by the customer.
Symptom
No gantry motion is reported by the customer. The Gantry does not drive. Emergency backout works
Error message
error Code = 60046, error Text = POS : SMART HANDLE CONTROL PROBLEM. CHECK IT OR CALL SERVICE, debug Text += pos-error=4B07, recovery Class = WR, major Function /= LC Gantry System impact: Permanent enable. Displayed message : "Smart handle problem. Please call service.".
Applies to
- Models
- Innova, Advantx
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.