GE Healthcare · X-ray VascularInnova
Error in application (disk capacity)
Symptom
Error in application (disk capacity) when starting a new exam on DL after replacing IP disks. No record acquisition available. See long description for further details. After replacing IP disks on the DL, message "Remaining disk capacity is less than 0 sec" is displayed on the DL (and live in room monitor) each time a new exam is created. In this case, record acquisition was not allowed whereas fluro acquisition was allowed.
Error message
Remaining disk capacity is less than 0 sec Application error: "Remaining disk capacity is less than 0 sec" is displayed each time a new exam is started on DL. Thus record acquisition is not allowed. Application error : "Remaining disk capacity is less than 0 sec" is displayed each time a new exam is started on DL. Thus record acquisition is not allowed.
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.