GE Healthcare · X-ray VascularInnovaAdvantx1050711
The system will not allow a Bolus chase.
Symptom
The system will not allow a Bolus chase. The message Table longitudinal position is out of range" is displayed The system will not allow a Bolus chase. The message Table longitudinal position is out of range" is displayed.
Error message
INX100: 1050711 "ALARM (!! , 2.3) - Table longitudinal position is out of range" WR GantryAxis Speed Degraded TBL LONGITUDINAL AXIS 0 1 - Table:Longitudinal axis potentiometer failure,TBL LONG out of range Z:/heroic/table geometry task.c 1558 1050711 "ALARM (!! , 2.3) - Table longitudinal position is out of range" WR GantryAxis Speed Degraded TBL LONGITUDINAL AXIS 0 1 - Table:Longitudinal axis potentiometer failure,TBL LONG out of range Z:/heroic/table geometry task.c 1558
Applies to
- Models
- Innova, Advantx
- Product
- X Innova 4100 X Do not use---------4100 systems 4100 systems
- Software
- $ Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9 FMI 12105 Unity M4 SP3.2 DL_Unity_4.18.9, FMI 12105 healthpage tag for this software is UNITY_M4_FMI_4.21 212009270 03/26/2010 13:31 GMT
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.