GE Healthcare · X-ray VascularInnova
Collimator blades are creeping into the image over time. they do not fully open. a system reset resolves the issue.
Symptom
I2K: Collimator blades are creeping into the image over time. they do not fully open. a system reset resolves the issue. I2K: Collimator blades are creeping into the image over time. they do not fully open. a system reset resolves the issue
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Innova Collimator Innova collimator Innova collimator
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.