GE Healthcare · MRExcite
Upgraded 1.5T HDx System Does Not Recognize Legacy Head Coil due to LPCA Configuration Type Setting Incorrect in Guided…
Upgraded 1.5T HDx System Does Not Recognize Legacy Head Coil due to LPCA Configuration Type Setting Incorrect in Guided Install.
Symptom
Upgraded System Does Not Recognize Legacy Head Coil See Long Description This system was just upgraded. When the FE plugs the Quad Head Coil into the legacy port on the LPCA, a message pops up as shown below, and he cannot scan with this coil. This message is not logged. Use Auto coil config to install HNS coil, do not use CFM to config this coil
Error message
Use Auto coil config to install HNS coil, do not use CFM to config this coil See Long Description This message appears on the screen when plugging in a coil. It is not logged.
Applies to
- Models
- Excite
- Product
- Excite HDx Includes "Excite HDi" system. 14.0 Software only.
- Software
- 14.0 M5 Excite HDx HDi Platforms only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.