GE Healthcare · X-ray VascularInnova1050208
INNOVA: "Smart Handle Problem.
"Smart Handle Problem.
Symptom
INNOVA: "Smart Handle Problem. Call Service" is displayed on the Innova image review monitor.
Error message
INX100: 1050208 Slave Smart Handle/Box: Table joystick validation switch error. This problem appears on the box that is connected on 'Gantry S' connector on table restpoint board. A permanent enable has been detected by the system. 1050208 Slave Smart Handle/Box: Table joystick validation switch error. This problem appears on the box that is connected on 'Gantry S' connector on table restpoint board. A permanent enable has been detected by the system.
Applies to
- Models
- Innova
- Product
- X Innova 2100 Do not use Innova 2100iq System Innova 2100
- Software
- Innova, Unity 3D M4 SP3.1, Unity 3D M4 SP3.1, DL Release : UNITY_M4_FMI_4.21 Ghost DL : 21.24.2 DL : DL_Unity_4.21.5 DL Atlas Core : 4.2-8_6 RTAC Atlas Core : 4.2-8_6 IDC : 5.31 Calypso : 4.42 Calypso Uptime : CLYUPT.UNITY_4.21 Positioner : RR POS LBY 1.4.4U_19 Jedi : P636BF1
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.