MGD Power Supply PS2 Replaced But New Power Supply Has Same Problem due to the Actual Failing MGD Power Supply Was The O…
MGD Power Supply PS2 Replaced But New Power Supply Has Same Problem due to the Actual Failing MGD Power Supply Was The One With No Fault LED Lit.
Symptom
MGD Power Supply PS2 Replaced But New Power Supply Has Same Problem See Long Description Every MGD chassis has two matching power supplies in its front plane: PS1 and PS2. These supplies have Fault LEDs that will come on if there is a problem within the supply. At this site the FE replaced the PS2 MGD Power Supply because one of its Fault LEDs was lit. PS1 did not have any Fault LED lit. But when he put the new PS2 power supply in, the same Fault LED was immediately lit on the new PS2 just like on the original one. The FE called the OnLine Center to ask of there was a general problem with these supplies, and might he have gotten a bad one from stock?
Applies to
- Models
- Excite
- Product
- 3T Excite HDx 14.0 Software. The software that this solution is tied to is indicated by the Software concept below.
- Software
- 14.0 M5 Excite HDx HDi Platforms only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- Unable to Load Applications Software during restoreinfo Due to Corrupt saveinfo Disk.
- CWA ID100315. Auto and Manual Prescan Fails.
- Ghosted or Smeared Head Images Using Head Coil due to Head TR Assembly.
- A Copper Coolant Line or Pipe Internal to the MCS Cabinet Chiller Burst due to Water Remaining in Unit Freezing During Shipment.