GE Healthcare · MROvationSignaExcite
The T/L Belts Will Not Stay latched to the CTL Coil.
Symptom
The T/L Belts Will Not Stay Latched to the CTL Coil See Long Description The T/L belts will not stay latched to the Ovation CTL coil. FEs commonly refer to this part as "the bones". The FE asked whether this part is a FRU or is there any repair that can be done to keep the T/L belts latched to the coil.See below for a picture of this coil with the T/L belts and the cervical bridge attached.
Applies to
- Models
- Ovation, Signa, Excite
- Product
- Ovation with EXCITE
- Software
- OVATION5 Applies to Ovation5 (Excite) only. Ovation5 is 12.x platform software, not OvationHD.
- Component
- 2282860 P9424LP CTL ARRAY COIL ASSY See Long Description 2282860 P9424LP CTL ARRAY COIL ASSY
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.
- AE title has changed on destination host.