GE Healthcare · X-ray VascularInnova1050182
Cannot Start a Bolus Chase Run.
Symptom
Cannot Start a Bolus Chase Run.
Error message
INX100: 1050182 TBL AXIS POT ENCODER FAILURE Table LONG : Potentiometer/encoder mismatch. Motion halted 1050182 WR Table ALARM (!! , 2.3) - TBL AXIS POT ENCODER FAILURE Debug: - Table Long : Potentiometer/encoder mismatch. Motion halted. (T:0x4AC3 H:0x0000 U:0x2000 The System has logged an error on the Table Longitudinal POT. 1050182 WR Table ALARM (!! , 2.3) - TBL AXIS POT ENCODER FAILURE Debug: - Table Long : Potentiometer/encoder mismatch. Motion halted. (T:0x4AC3 H:0x0000 U:0x2000) The System has logged an error on the Table Longitudinal POT.
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Component
- Omega IV Cardiac table Omega IV Cardiac table Omega IV cardiac table Omega V Table Omega V Table Omega V Table Innova 2100–IQ Case Innova 2100–IQ System can be supplied with an OMEGA IV Compact patient table, an OMEGA V long patient table, which includes a table side control with Contour Filter, or a InnovaIQ patient Table. Innova 3100/3100-IQ and 4100/4100-IQ Case Innova 3100/4100 Systems can be supplied with an OMEGA V Long patient table or InnovaIQ patient Table, which includes a table side control with Contour Filter. Illustration 2-1: Omega patient table (with TSSC)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.