GE Healthcare · X-ray VascularAdvantxInnova
advantx 42BE inverter 1 failure is displayed on the console.
Symptom
advantx 42BE inverter 1 failure is displayed on the console. During fluoro Intermittently F11/12 200A fuse open. no exposure. advantx error 42BE - inverter 1 failure is displayed on the console. During fluoro Intermittently F11/12 200A fuse open.
Error message
Advantx 42BE: :Power unit inverter 1 failure. Call service. followed by 4260 Error 42BE :Power unit inverter 1 failure. Call service In–Room Display Message: POWER UNIT ERROR. CALL SERVICE. HW code: N/A User Code: N/A This Error is usually followed by Error 4260: Power Unit in a reset state due to Error. The system will not allow exposures. This error indicates that the system has detected an error on inverter 1
Applies to
- Models
- Advantx, Innova
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Vamp inverter power supply fuses Vamp inverter power supply fuses part # CG10A1024H02 (200 amp). 45441291200 AMP FUSE KIT (FOR DC BUS) Vamp inverter power supply fuses part # CG10A1024H02 (200 amp), 45441291200 AMP FUSE KIT (FOR DC BUS)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.