GE Healthcare · X-ray VascularInnova1050081

Footswitch error, use Handle switch.

Symptom

Footswitch error, use Handle switch. Call Service. 1050081 positioner PIB 24v Kernel Power Failure Error. TSSC issues Foot switch error, use Handle switch. Call Service. DL error logs have numerous 1050081 errors Foot switch error, use Handle switch. Call Service. DL error logs have numerous positioner PIB 1050081 errors TSSC issues

TSSC not working or functioning tssc not working or functioning

Error message

INX100: Mother Regulation Board DS851 is not illuminated. F851 is blown. P24V is not present on the system. The Mother Regulation Board DS851 is not illuminated. F851 is blown which generates P24V to the system. Errors: no ITU display, room door interlock, no fluoro, no exposure, no room light control. Measured voltage on the supply side of the fuse holder to be 24.06vdc with the fuse blown. On the load side of the fuse I checked resistance from the fuse clip to the copper ground bar in the positioner cabinet with power still on and found the following: 115 ohms right after the fuse blew and everything still connected 33K ohms with only the footswitch disconnected (power still on)

Error 1050081 PIB 24v Kernel Power Failure Error

Applies to

Models
Innova
Product
Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
Component
Positioner Gantry Positioner Gantry Positioner Gantry
Area
X-ray Vascular

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare X-ray Vascular issues