GE Healthcare · MR
Patient Alarm squeeze ball is not working Due to No Power to Patient Alert Box.
Symptom
The Patient Alarm Box is not working and its light is out. The tech has unplugged and plugged the power back into the control box but it hasn't fixed the problem.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR5-HFO5 Open Speed with Excite Product
- Component
- 46-317758P3 MAGNACOUSTICS 12V 60HZ POWER SUPPLY This is the AC adapter used to power the Patient Alarm Box. This is the AC adapter used to power the Patient Alarm Box.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.