GE Healthcare · X-ray VascularInnova50110
Gantry motion not working for at least one axis.
Symptom
IN2K: Gantry motion not working for at least one axis. IN2K: Gantry motion not working for at least one axis (can be intermittent problem) IN2K: Gantry motion not working for at least one axis. When trying to move gantry (in this case, C-arc axis), an error "overcurrent detected ...." is displayed. Note : the problem may be intermittent depending root cause of the failure.
Error message
50110 POS : CARC OVER CURRENT ERROR 4ABB HDW 0002 USR = 0200 50110 POS SMA: Over current error DO LC Gantry (null) Component(s) Positioner SMA Mechanical 1 0 POS ERROR=4ABB,HDW STATUS=0002,USR STATUS=0200 XRPAtlasLogger.cpp 4ABB HW 0002 User 0200 => Frontal arc overcurrent Note : HW error / Axis relationship 0x0000 HW_FRT_L 0x0001 HW_FRT_PVT 0x0002 HW_FRT_ARC 0x0003 HW_FRT_II User error signification 0x0100 US_AXIS_HARD_OVER_CURRENT 0x0200 US_AXIS_FAST_OVER_CURRENT 0x0400 US_AXIS_SLOW_OVER_CURRENT
Applies to
- Models
- Innova
- Product
- Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- 2261936: 27365-II MOTOR CABLE 2261936: 27365-II MOTOR CABLE 2261936: 27365-II MOTOR CABLE
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.