OrthoMRI There is metal attached to the patient's clothes which caused the signal loss OrthoMRI No signal on the top of…
OrthoMRI There is metal attached to the patient's clothes which caused the signal loss OrthoMRI No signal on the top of the real time images OrthoMRI Removed the metal object from the patient's clothe…
Symptom
OrthoMRI No signal on the top of the real time images See long description. "Real Time" imaging is a patient positioning feature located on the set up scan page to enable the operator to position the patient properly in the bore before running a scout. These images can be acquired in all three planes. The images are reconstructed but not saved to the hard drive and are only available to be viewed while the patient positioning scan is run thus, the term "Real Time".
Applies to
- Product
- OrthoMRI EscanNE. OrthoMRI EscanNE.
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.