GE Healthcare · MR
OrthoMRI TPM module needs to be reset.
Symptom
OrthoMRI Unable to scan with TPM error The customer attempts to run a scout but the system aborts the scan with a TPM communication error.
Error message
OrthoMRI TPM communication error See Long Description. Notice: Always use the most current revision of service documentation. Try to perform these steps in this order: re-boot the system and repeat the Command/Operation that went wrong, check the functionality of the module indicated in the error message MTCM and TPM failure: check the led status, check the system functionality and system connections, try to replace the module
Applies to
- Product
- OrthoMRI EscanNE. OrthoMRI EscanNE.
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.