INX1X1 lateral gantry will not move. “Unreachable Position” when trying to drive the lateral Plane into or out of Iso Ce…
INX1X1 lateral gantry will not move. “Unreachable Position” when trying to drive the lateral Plane into or out of Iso Center.
Symptom
INX1X1 lateral gantry will not move. “Unreachable Position” when trying to drive the lateral Plane into or out of Iso Center. It does not move. Also, the frontal plane is moving slowly. The frontal lift will drive down, but not up from the s/h. the Emergency backout works. INX1X1 lateral gantry will not move. “Unreachable Position” when trying to drive the lateral Plane into or out of Iso Center. It does not move. Also, the frontal plane is moving slowly. The frontal lift will drive down, but not up from the s/h. the Emergency backout works.
Error message
1050410 Front: ANT CINEMATIC ERROR FRT Lift and 1050165 POS NOT REACHABLE 1050410 Front: ANT CINEMATIC ERROR FRT Lift DO GantryAxis Intermittent Motion Stop Frt_ANT_CINEMATIC_ERROR_Lift 0 0 - Axis out of range 1050165 POS NOT REACHABLE WR GantryAxis 0 Frt_POS_NOT_REACHABLE 0 0 - Autopos or SendAngle : required position bad (0x4B0A HW:0 & US:0), Position not attainable
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.