GE Healthcare · MR
High Vessel pressure Due to the chilled water source NOT meeting Coldhead Compressor cooling requirements.
Symptom
SHEM Alarm He Vessel Pressure High. SHEM Alarm He Vessel Pressure High, the Helium Vessel Pressure has exceeded the high alarm limit setting on the SHeM.
Error message
SHEM Alarm He Vessel Pressure High. SHEM Alarm He Vessel Pressure High, the Helium Vessel Pressure has exceeded the high alarm limit setting on the SHeM.
Applies to
- Product
- Magnet Monitor SHeM Granite. Part Number: 2209000 and T3504DR Should be installed with FMI 60583, SIGNA MAGNET MONITOR PACEMAKER (FMI kit 2319197) 2282790 Pacemaker 2266628 Remote Alarm Box 2291548 Cable, Pacemaker to Magnet Monitor 2264859-2 Cable, Pacemaker to Remote Alarm Box Magnet Monitor Proprietary Software: 2252032-3 The following 2 manuals may be downloaded from http://3.87.118.28/optec3/common/magnets/magnets.htm LCC Magnet Mon. Hardware Install:2230681 LCC ProActive Software Install & T/S:2236995
- Software
- SHeM Proprietary Software 1.3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.