ID119348 Xray not Available - Reset System; If Problem Persists Call Service is displayed on the Image Monitor.

Symptom

Error message

INX100 3602023 IH 0107H XRTechMgr Jedi Rotation board defect. Inverter permanent overcurrent Jedi Error code 0107H 3602023 IH XRTechMgr Jedi: Rotation board defect Debug: jedi-error-code=107h JEDI Error Code: 0107H Inverter permanent overcurrent Data Related to Error: 2 Tube 1 70C: OK, Tube 40C: Set, Rotor Thermal Error: OK, Inverter thermal Error: OK, Tank thermal Error: OK, Door Status: Closed Phase: PREPARATION_IN_PROGRESS Rotation Inverter permanent over current. An over current has been detected and 3 restarts have been tried unsuccessfully within a single rotation state. Error 3602023 is issued.

Applies to

Models

Innova

Product

Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100

Component

Innova Jedi Innova Jedi Innova Jedi

Area

X-ray Vascular

Related GE Healthcare X-ray Vascular issues

• The Worklist does not refresh on the system when performing a query.
• Innova System boot failure
• INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
• Firewall is broadcasting DHCP addresses
• Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
• No gantry motion is reported by the customer.