GE Healthcare · X-ray VascularInnova50112
Pivot Motor does not drive
Symptom
Pivot Axis is not moving Pivot Axis will not move intially but does recover.
Error message
Innova: 50112 POS SMA: Position or speed measure error: DO: Debug: POS ERROR=4ABD: HDW STATUS=0001: USR STATUS=8000 50112: POS SMA: Position or speed measure error: DO: Debug: POS ERROR=4ABD: HDW STATUS=0001: USR STATUS=8000
Applies to
- Models
- Innova
- Product
- Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100
- Software
- Bolus M4 DL release : DL_LBYBOLUSM4_9.2.050615 Ghost DL-2 : NA Ghost DL-3 : 18.8 Ghost DL-5 : 20.6 DL : DL_LBYBOLUSM4_9.2.050615 DL Atlas Core : 3.1.R RTAC Atlas Core : 3.1.R IDC : 4.5.5 Calypso : 2.21 Calypso Uptime : BOLUS1.24 Positioner : 1.2.24B_IS6.6 Jedi : B6.30BFC
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.