GE Healthcare · MR
OrthoMRI Coil 1 is failing SNR test during troubleshooting.
Symptom
OrthoMRI Noise on images on coil 1
Applies to
- Product
- OrthoMRI Cscan
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR9101585000 STANDARD RF COIL NO. 1 (KNEE/ANKLE) Notice: Always use the most current revision of service documentation. To locate the center frequency; Run manual homogeneity in ARAS, or go to .rec file management in the Internet Explorer while logged in as serv and open the freq.rec file, or display any image from the patient database, click on view, then properties then, select "all properties" in the pop-up. Scroll down the file and locate " Imaging Frequency ", this is the center frequency. This coil must be tuned specifically for each system by the supplier. FE must provide the frequency that this coil needs to be tuned for in the order comments.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.