GE Healthcare · MR
OrthoMRI The Power switch lamp is broken.
Symptom
OrthoMRI Power switch is not lit On the EscanNE systems the electronics cabinet is located in the magnet room. In order to power on the electronics (not the PC computer) the rocker switch must be switched on. When in the "ON" position the switch illuminates. This is separate from the line voltage indicator which is a round LED to the left of the power-on/off switch. When this indicator is lit, there is line voltage available which is the normal condition.
Applies to
- Product
- OrthoMRI EscanNE. OrthoMRI EscanNE.
- Software
- OrthoMRI S/W Release 9.1B. OrthoMRI S/W Release 9.1B.
- Component
- OrthoMRI LNR2600000086 BULB See Long Description Notice: Always use the most current revision of service documentation. Location of Power switch and main line indicator.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Running grafidy3, and find there are spikes on the waveforms in the manual prescan display, both windows.
- OrthoMRI Network cable is unplugged
- TPS/MGD fails to download or reset. mgd_term windows fail to mount file system.
- CWA ID100060 Unable To Film.
- Fails to Scan with TORSO Coil.
- The Carriage Fails to Advance to Latch to the Table and to Retract When it is Raised, Undocked or Lowered.