GE Healthcare · X-ray VascularInnova1050310
Detector Motion Error, Lift Command Disabled.
Symptom
INX100: Detector Motion Error, Lift Command Disabled. Reset system to recover is displayed on the Innova Monitor
Error message
INX100: 1050310 WR GantryAxis Detector Lift Motor failure occurred once Debug: - GEO_GF_MCBLiftMotorFailureDetected : First Lift motor failure 1050310 WR GantryAxis Detector Lift Motor failure occurred once Debug: -GEO_GF_MCBLiftMotorFailureDetected : First Lift motor failure 1050310 WR GantryAxis Detector Lift Motor failure occurred once Debug: - GEO_GF_MCBLiftMotorFailureDetected : First Lift motor failure
Applies to
- Models
- Innova
- Product
- Innova X1 X1 Biplane Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X1 X1 Bi-plane Innova 2121 or 3131 Bi-plane System Innova X100 Monoplane Innova X100 Monoplane from product name Innova 2100, 3100 and 4100 Innova X100 Monoplane Innova 2100, 3100 and 4100 Innova 2000 Innova 2000 systems Innova 2000 systems
- Component
- Positioner Gantry Positioner Gantry Positioner Gantry
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- The Worklist does not refresh on the system when performing a query.
- Innova System boot failure
- INX1X; Message Limit switch engaged; LP4 Lateral Detector lift will not move after going to max SID using the Emergency Backout button on the lift cover because the lift hit maximum (Max) SID limit sw…
- Firewall is broadcasting DHCP addresses
- Cooling Failure; Shut System down and call Service is displayed on the Innova Image monitor
- No gantry motion is reported by the customer.